XLE FIR_Drive v2.0 DSP Setting Notes 
11-24-10	MDK

These XLE FIR_Drive v2.0 settings were created for use with the EV FIR_Drive controllers. These settings include  FIR Filters and peak (PA Limiter) and thermal (TEMP Limiter) protection. At this point they can be used with the TG series amps with RCM-26 DSP and the Dx46. The N8000 does not currently have the ability to use TEMP limiters. If you are using an N8000 please use the XLE FIR v2.0 settings for N8000. The FIR_Drive settings can be identified by the FIR_Drive in the sps file name. 

The XLE181FIR and XLE191FIR v2.0 presets are time-aligned to allow multi-pattern array creation. 

Subwoofers are time-aligned and level-adjusted to be flown in the same array. The subwoofer level is set for a 1/4 ratio of subwoofers to top boxes. Subwoofer output level and alignment delay may need to be adjusted for your application.

If you have other questions or comments about the settings, please contact EV Technical Support at:


Pro Audio - Technical Support Group 
Bosch Communications Inc
12000 Portland Ave S 
Burnsville MN  55337-1522
USA
 
Phone: 800-392-3497 
FAX:   952-884-0043 
Web:   www.boschcommunications.com 
 